Editing
Effektives Potential
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
Es bietet sich an die Orientierung so zu wählen, dass die z Achse auf der vom Relativabstandsvektor und Relativimpuls aufgespannten Ebene senkrecht steht. :<math>L={{L}_{z}}{{e}_{z}}=r\times p,{{e}_{z}}\bot A\left( r,\dot{r} \right)</math> (5.1) Daraus folgt aber, aufgrund der Definition der Kugelkoordinaten, dass <math>\vartheta =\pi /2</math>ist daraus folgt, dass <math>\sin \vartheta =1</math>uns <math>\dot{\vartheta }=0</math>somit vereinfacht sich die Relativgeschwindigkeit zu. :<math>{{\mathbf{\dot{r}}}^{2}}={{\dot{r}}^{2}}+{{r}^{2}}{{\dot{\varphi }}^{2}}</math> (5.2) Die Drehimpulserhaltung ermöglicht es <math>\dot{\varphi }</math>nach dem Drehimpuls umzuformen und so zu eliminieren: :<math>\dot{\varphi }=\frac{{{L}_{z}}}{\mu {{r}^{2}}}</math> (5.3) Würde man dies in die Beziehung für die relative kinetische Energie einsetzen so erhielte man einen Term der nicht von <math>\dot{q}</math> sondern von <math>q</math>abhängt, was der Lagrang’schen Definition der kinetischen Energie widerspräche. :<math>{{T}_{R}}=\frac{1}{2}\mu {{\dot{r}}^{2}}+\underbrace{\frac{L_{z}^{2}}{2\mu {{r}^{2}}}}_{\dot{q}?}</math> (5.4) Also muss dieser Term zur Potentiellen Energie hinzugefügt werden. Diese heißt nun das effektive Potential (U). Es darf allerdings kein Minuszeichen vor den neuen Term kommen da die Energieerhaltung E=T+U in jedem Fall gewahr werden muss. :<math>{{V}_{eff}}\equiv U=\frac{L_{z}^{2}}{2\mu {{r}^{2}}}-\frac{\alpha }{r}</math> (5.5) Die Lagrangegleichung hat nun die korrekte Form und lautet. :<math>L\left( \dot{q},q,t \right)=T\left( \dot{q},t \right)+U\left( q,t \right)=\underbrace{\frac{1}{2}M{{{\mathbf{\dot{R}}}}^{2}}}_{{{T}_{S}}}+\underbrace{\frac{1}{2}\mu {{{\dot{r}}}^{2}}}_{{{{{T}'}}_{R}}}-\underbrace{\frac{L_{z}^{2}}{2\mu {{r}^{2}}}+\frac{\alpha }{r}}_{U}</math> (5.6) ==Bahnkurve== Wir wechseln wählen jetzt ein Inertialsystem des Schwerpunkts. Nach dem ersten Newtonschen Gesetz ist dies immer Möglich. Da der Schwerpunkt nun aber ruht oder sich gleichmäßig gleichförmig Bewegt verschwinden alle Komponenten von <math>\mathbf{\ddot{R}}</math>. Somit lautet die Lagrangefunktion :<math>L\left( \dot{q},q,t \right)=\frac{1}{2}\mu {{\dot{r}}^{2}}-\frac{L_{z}^{2}}{2\mu {{r}^{2}}}+\frac{\alpha }{r}</math> (6.1) Stellt man die Energieerhaltung nach :<math>T=E-U</math> (6.2) um und setzt dann T ein so erhält man: :<math>\begin{align} & \Rightarrow \frac{1}{2}\mu {{\left( \frac{dr}{dt} \right)}^{2}}=E-U \\ & \Leftrightarrow {{\left( \frac{dr}{dt} \right)}^{2}}=\frac{2}{\mu }\left( E-U \right) \\ & \Leftrightarrow dt=\frac{dr}{\sqrt{\frac{2}{\mu }\left( E-U \right)}} \\ \end{align}</math> Die Methode die das Umformen physikalischer Differentialformeln auf diese Art und Weise rechtfertigt heißt: „Methode der Trennung der Variablen.“ Setzt man nun dieses Zeitdifferential in die Beziehung zwischen Drehimpuls und <math>\varphi </math>(5.3)Koordinate ein so erhält man. :<math>d\varphi =\frac{{{L}^{2}}}{\mu {{r}^{2}}}\frac{dr}{\sqrt{\frac{2}{\mu }\left( E-U \right)}}=\frac{{{L}^{2}}}{{{r}^{2}}}\frac{dr}{\sqrt{2\mu \left( E-U \right)}}=\frac{{{L}^{2}}}{{{r}^{2}}}\frac{dr}{\sqrt{2\mu E-\frac{L_{z}^{2}}{{{r}^{2}}}+\frac{2\mu \alpha }{r}}}</math> (6.3) Die Stammfunktion lautet bekannter maßen : :<math>\varphi =\arccos \left( \frac{\frac{{{L}_{z}}}{r}-\frac{\mu \alpha }{{{L}_{Z}}}}{\sqrt{2\mu E+\frac{{{\mu }^{2}}{{\alpha }^{2}}}{L_{z}^{2}}}} \right)</math> (6.4) Wir führen noch die Abkürzungen ein: :<math>p:=\frac{L_{z}^{2}}{\mu \alpha }\varepsilon :=\sqrt{1+\frac{2EL_{z}^{2}}{\mu {{\alpha }^{2}}}}</math> (6.5) Damit können wir die vorherige Beziehung für <math>\varphi </math>umschreiben als: :<math>\frac{p}{r}=1+\varepsilon \cos \varphi </math> (6.6) Es sollte keine zu großen Schwierigkeiten bereiten zu erkennen, dass es sich hierbei um die Gleichung für Kegelschnitte handelt: :<math>\varepsilon <0</math> Ellipse :<math>\varepsilon =0</math> Parabel :<math>\varepsilon >0</math> Hyperbel [[Kategorie:Mechanik]]
Summary:
Please note that all contributions to testwiki are considered to be released under the Creative Commons Attribution (see
Testwiki:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation menu
Personal tools
Not logged in
Talk
Contributions
Log in
Namespaces
Page
Discussion
English
Views
Read
Edit
Edit source
View history
More
Search
Navigation
Main page
Recent changes
Random page
Physikerwelt
Tools
What links here
Related changes
Special pages
Page information
In other projects